OpenStats
openstats.ca
Drinking Water Quality and Supply

Revelstoke Drinking Water Quality

By OpenStats · Built from official Canadian sources

Direct municipal data
B

Water quality grade

Good

Graded against Health Canada drinking water guidelines

Lead within guidelinepH in range
Hardness vs provincial average200 mg/L · prov. avg 162 mg/L
Lead vs provincial average0 μg/L · prov. avg 0.4 μg/L
Hardness
200 mg/L
Lead
0 μg/L
≤ 5 μg/L
pH
7.8
6.5–8.5 range
Hardness
200 mg/L
Very hard
Lead
0 μg/L
Max: 5 μg/L
pH
7.8
6.5–8.5
Chlorine
0.5 mg/L
Max: 4 mg/L

As an Amazon Associate, OpenStats earns from qualifying purchases.

Partner

Lab water test for Revelstoke taps

Municipal reports cover the plant. A Tap Score kit tests the water at a Revelstoke tap for a broader contaminant panel.

Order a lab water test →

Lab kit partner link. We may earn a commission when tracking is active.

Compare softeners · Water test kits · Hardness guide

Reading this page

Revelstoke's drinking water earns Grade B (Good). Hardness is 200 mg/L (very hard), and pH is 7.8 against Health Canada's 6.5–8.5 guideline.

Lead at 0 μg/L is below the 5 μg/L maximum, and fluoride is 0.6 mg/L against a guideline of ≤ 1.5 mg/L.

How to use this page: read the headline metric and provincial comparison first, then supply and treatment notes, then the source footer for the underlying dataset.

Watershed to tap

Supply and treatment

How Revelstoke draws, treats, and distributes drinking water, from municipal and utility publications. Chemistry grades above come from separate parameter records; this section does not invent plant lab figures.

Source type

Groundwater

Research confidence: medium

Source waters

  • groundwater

Treatment plants

  • Revelstoke Water Treatment Plant

    From municipal open data or regional estimate (verify locally).

Cited sources

Outbound municipal or utility citations pending. See methodology for how supply research is gathered.

Supply notes summarize published utility materials. They are not a substitute for the issuing authority's current notices or for a licensed tap test.

All monitored parameters meet Health Canada guidelines.

Health parameters compliant; minor aesthetic factors such as hardness or pH near guideline edges.

Figure 1 · Supply chain

From watershed to tap

Compared to provincial average

British Columbia · 58 cities in sample

Hardness (city vs British Columbia avg)200 mg/L
pH (city vs British Columbia avg)7.8
Lead (city vs British Columbia avg)0 μg/L
Fluoride (city vs British Columbia avg)0.6 mg/L

Provincial average: hardness 162 mg/L · pH 7.6 · lead 0.4 μg/L · fluoride 0.6 mg/L

Full parameters

ParameterReadingHealth Canada guidelineStatus
Hardness200 mg/LNo health limit (aesthetic)Compliant
pH7.86.5–8.5Compliant
Lead0 μg/L≤ 5 μg/LCompliant
Fluoride0.6 mg/L≤ 1.5 mg/LCompliant
Chlorine (free)0.5 mg/L≤ 4 mg/LCompliant
Turbidity0.1 NTU≤ 1 NTU (typical target)Compliant
Alberta water licences

WaterRegister.ca

On a private well or holding an Alberta water allocation licence? Water Register maps EPA licence records, transfer comparables, and watershed context across the province.

Explore WaterRegister.ca →

Water softeners for hard water

Very hard water. Whole-house softeners are the high-ticket fit; salt and test kits support the install.

As an Amazon Associate, OpenStats earns from qualifying purchases.

· Compare options

Source · ECCC / municipal open data (seed). Last updated 2026-09-01. Refreshed on the site's automated schedule.