OpenStats picks for Matane — very hard water (271 mg/L)
Matane hardness is 271 mg/L — pitcher filters improve taste but will not soften water. Size a metered whole-house softener for scale, and add under-sink carbon for drinking chlorine.
By OpenStats · Built from official Canadian sources
Regional estimateWater quality grade
Fair
Graded against Health Canada drinking water guidelines
Matane hardness is 271 mg/L — pitcher filters improve taste but will not soften water. Size a metered whole-house softener for scale, and add under-sink carbon for drinking chlorine.
OpenStats pick for Matane’s 271 mg/L hardness — metered whole-house softener sized for very hard Canadian tap water
Matane: under-sink carbon for drinking water (chlorine 1.2 mg/L) — does not remove hardness minerals
Matane’s 1.2 mg/L chlorine — bestselling shower filter on Amazon.ca
Verify 271 mg/L hardness at your tap before buying salt and sizing a softener
As an Amazon Associate, OpenStats earns from qualifying purchases.
Municipal reports cover the plant. A Tap Score kit tests the water at a Matane tap for a broader contaminant panel.
Lab kit partner link. We may earn a commission when tracking is active.
Matane's drinking water earns Grade C (Fair). Hardness is 271 mg/L (very hard), and pH is 6.9 against Health Canada's 6.5–8.5 guideline.
Lead at 0.7 μg/L is below the 5 μg/L maximum, and fluoride is 0.6 mg/L against a guideline of ≤ 1.5 mg/L.
How to use this page: read the headline metric and provincial comparison first, then supply and treatment notes, then the source footer for the underlying dataset.
Watershed to tap
How Matane draws, treats, and distributes drinking water, from municipal and utility publications. Chemistry grades above come from separate parameter records; this section does not invent plant lab figures.
Groundwater
Research confidence: high
Station de purification Matane
Groundwater chlorination and softening (MELCC). Switched from surface water to wells in 2004; fourth well added 2012 mainly for seafood-plant demand.
Capacity ~21,840 m³/day; rural properties remain on private wells.
Health parameters meet Health Canada limits; turbidity above the 1 NTU typical target and very hard water.
One or more parameters exceed a Health Canada drinking water guideline or turbidity target.
Figure 1 · Supply chain
From watershed to tap
Quebec · 34 cities in sample
Provincial average: hardness 183 mg/L · pH 7.5 · lead 0.3 μg/L · fluoride 0.6 mg/L
| Parameter | Reading | Health Canada guideline | Status |
|---|---|---|---|
| Hardness | 271 mg/L | No health limit (aesthetic) | Compliant |
| pH | 6.9 | 6.5–8.5 | Compliant |
| Lead | 0.7 μg/L | ≤ 5 μg/L | Compliant |
| Fluoride | 0.6 mg/L | ≤ 1.5 mg/L | Compliant |
| Chlorine (free) | 1.2 mg/L | ≤ 4 mg/L | Compliant |
| Turbidity | 3.2 NTU | ≤ 1 NTU (typical target) | Exceeds guideline |
On a private well or holding an Alberta water allocation licence? Water Register maps EPA licence records, transfer comparables, and watershed context across the province.
Explore WaterRegister.ca →OpenStats pick
Matane hardness is 271 mg/L — pitcher filters improve taste but will not soften water. Size a metered whole-house softener for scale, and add under-sink carbon for drinking chlorine.
As an Amazon Associate, OpenStats earns from qualifying purchases.
· Compare options