OpenStats picks for Whitecourt — very hard water (276 mg/L)
Whitecourt hardness is 276 mg/L — pitcher filters improve taste but will not soften water. Size a metered whole-house softener for scale, and add under-sink carbon for drinking chlorine.
By OpenStats · Built from official Canadian sources
Regional estimateWater quality grade
Fair
Graded against Health Canada drinking water guidelines
Whitecourt hardness is 276 mg/L — pitcher filters improve taste but will not soften water. Size a metered whole-house softener for scale, and add under-sink carbon for drinking chlorine.
OpenStats pick for Whitecourt’s 276 mg/L hardness — metered whole-house softener sized for very hard Canadian tap water
Whitecourt: under-sink carbon for drinking water (chlorine 0.9 mg/L) — does not remove hardness minerals
Whitecourt’s 0.9 mg/L chlorine — bestselling shower filter on Amazon.ca
Verify 276 mg/L hardness at your tap before buying salt and sizing a softener
As an Amazon Associate, OpenStats earns from qualifying purchases.
Municipal reports cover the plant. A Tap Score kit tests the water at a Whitecourt tap for a broader contaminant panel.
Lab kit partner link. We may earn a commission when tracking is active.
Whitecourt's drinking water earns Grade C (Fair). Hardness is 276 mg/L (very hard), and pH is 7.9 against Health Canada's 6.5–8.5 guideline.
Lead at 0.4 μg/L is below the 5 μg/L maximum, and fluoride is 0.7 mg/L against a guideline of ≤ 1.5 mg/L.
How to use this page: read the headline metric and provincial comparison first, then supply and treatment notes, then the source footer for the underlying dataset.
Watershed to tap
How Whitecourt draws, treats, and distributes drinking water, from municipal and utility publications. Chemistry grades above come from separate parameter records; this section does not invent plant lab figures.
Mixed surface and groundwater
Research confidence: medium
Whitecourt Water Treatment Plant
From municipal open data or regional estimate (verify locally).
Health parameters meet Health Canada limits; turbidity above the 1 NTU typical target and very hard water.
One or more parameters exceed a Health Canada drinking water guideline or turbidity target.
Figure 1 · Supply chain
From watershed to tap
Alberta · 51 cities in sample
Provincial average: hardness 178 mg/L · pH 7.5 · lead 0.3 μg/L · fluoride 0.6 mg/L
| Parameter | Reading | Health Canada guideline | Status |
|---|---|---|---|
| Hardness | 276 mg/L | No health limit (aesthetic) | Compliant |
| pH | 7.9 | 6.5–8.5 | Compliant |
| Lead | 0.4 μg/L | ≤ 5 μg/L | Compliant |
| Fluoride | 0.7 mg/L | ≤ 1.5 mg/L | Compliant |
| Chlorine (free) | 0.9 mg/L | ≤ 4 mg/L | Compliant |
| Turbidity | 3.7 NTU | ≤ 1 NTU (typical target) | Exceeds guideline |
On a private well or holding an Alberta water allocation licence? Water Register maps EPA licence records, transfer comparables, and watershed context across the province.
Explore WaterRegister.ca →OpenStats pick
Whitecourt hardness is 276 mg/L — pitcher filters improve taste but will not soften water. Size a metered whole-house softener for scale, and add under-sink carbon for drinking chlorine.
As an Amazon Associate, OpenStats earns from qualifying purchases.
· Compare options