OpenStats picks for Port Hope — very hard water (252 mg/L)
Port Hope hardness is 252 mg/L — pitcher filters improve taste but will not soften water. Size a metered whole-house softener for scale, and add under-sink carbon for drinking chlorine.
By OpenStats · Built from official Canadian sources
Regional estimateWater quality grade
Good
Graded against Health Canada drinking water guidelines
Port Hope hardness is 252 mg/L — pitcher filters improve taste but will not soften water. Size a metered whole-house softener for scale, and add under-sink carbon for drinking chlorine.
OpenStats pick for Port Hope’s 252 mg/L hardness — metered whole-house softener sized for very hard Canadian tap water
Port Hope: under-sink carbon for drinking water (chlorine 0.9 mg/L) — does not remove hardness minerals
Port Hope’s 0.9 mg/L chlorine — bestselling shower filter on Amazon.ca
Verify 252 mg/L hardness at your tap before buying salt and sizing a softener
As an Amazon Associate, OpenStats earns from qualifying purchases.
Municipal reports cover the plant. A Tap Score kit tests the water at a Port Hope tap for a broader contaminant panel.
Lab kit partner link. We may earn a commission when tracking is active.
Port Hope's drinking water earns Grade B (Good). Hardness is 252 mg/L (very hard), and pH is 7.5 against Health Canada's 6.5–8.5 guideline.
Lead at 0.4 μg/L is below the 5 μg/L maximum, and fluoride is 0.6 mg/L against a guideline of ≤ 1.5 mg/L.
How to use this page: read the headline metric and provincial comparison first, then supply and treatment notes, then the source footer for the underlying dataset.
Watershed to tap
How Port Hope draws, treats, and distributes drinking water, from municipal and utility publications. Chemistry grades above come from separate parameter records; this section does not invent plant lab figures.
Surface water
Research confidence: medium
Port Hope Water Treatment Plant
Lake Ontario surface plant for the Municipality of Port Hope urban system.
Municipal distribution with lakeside treatment and in-town storage.
Health parameters meet Health Canada limits; turbidity above the 1 NTU typical target and very hard water.
Health parameters meet Health Canada limits; turbidity exceeds the typical 1 NTU aesthetic target.
Figure 1 · Supply chain
From watershed to tap
Ontario · 123 cities in sample
Provincial average: hardness 178 mg/L · pH 7.5 · lead 0.4 μg/L · fluoride 0.6 mg/L
| Parameter | Reading | Health Canada guideline | Status |
|---|---|---|---|
| Hardness | 252 mg/L | No health limit (aesthetic) | Compliant |
| pH | 7.5 | 6.5–8.5 | Compliant |
| Lead | 0.4 μg/L | ≤ 5 μg/L | Compliant |
| Fluoride | 0.6 mg/L | ≤ 1.5 mg/L | Compliant |
| Chlorine (free) | 0.9 mg/L | ≤ 4 mg/L | Compliant |
| Turbidity | 1.3 NTU | ≤ 1 NTU (typical target) | Exceeds guideline |
On a private well or holding an Alberta water allocation licence? Water Register maps EPA licence records, transfer comparables, and watershed context across the province.
Explore WaterRegister.ca →OpenStats pick
Port Hope hardness is 252 mg/L — pitcher filters improve taste but will not soften water. Size a metered whole-house softener for scale, and add under-sink carbon for drinking chlorine.
As an Amazon Associate, OpenStats earns from qualifying purchases.
· Compare options