Sponsored
Water softeners for hard water
Very hard water. Whole-house softeners are the high-ticket fit; salt and test kits support the install.
Melfort Drinking Water Quality
By OpenStats · Built from official Canadian sources
Direct municipal dataB
Water quality grade
Good
Graded against Health Canada drinking water guidelines
Lead within guidelinepH in range
Hardness vs provincial average214 mg/L · prov. avg 189 mg/L
Lead vs provincial average0.6 μg/L · prov. avg 0.5 μg/L
Hardness
214 mg/L
Lead
0.6 μg/L
≤ 5 μg/L
pH
7.7
6.5–8.5 range
Hardness
214 mg/L
Very hard
Lead
0.6 μg/L
Max: 5 μg/L
pH
7.7
6.5–8.5
Chlorine
1.1 mg/L
Max: 4 mg/L
SponsoredAlso consider
Whole-house water softener
Best for hardness ≥ 180 mg/L
SponsoredAlso consider
Water hardness test strips
Confirm mg/L before sizing a unit
As an Amazon Associate, OpenStats earns from qualifying purchases.
Partner
Lab water test for Melfort taps
Municipal reports cover the plant. A Tap Score kit tests the water at a Melfort tap for a broader contaminant panel.
Lab kit partner link. We may earn a commission when tracking is active.
Reading this page
Melfort's drinking water earns Grade B (Good). Hardness is 214 mg/L (very hard), and pH is 7.7 against Health Canada's 6.5–8.5 guideline.
Lead at 0.6 μg/L is below the 5 μg/L maximum, and fluoride is 0.5 mg/L against a guideline of ≤ 1.5 mg/L.
How to use this page: read the headline metric and provincial comparison first, then supply and treatment notes, then the source footer for the underlying dataset.
Watershed to tap
Supply and treatment
How Melfort draws, treats, and distributes drinking water, from municipal and utility publications. Chemistry grades above come from separate parameter records; this section does not invent plant lab figures.
Source type
Surface water
Research confidence: medium
Source waters
- surface
Treatment plants
Melfort Water Treatment Plant
From municipal open data or regional estimate (verify locally).
Health parameters meet Health Canada limits; turbidity above the 1 NTU typical target and very hard water.
Health parameters meet Health Canada limits; turbidity exceeds the typical 1 NTU aesthetic target.
Figure 1 · Supply chain
From watershed to tap
Compared to provincial average
Saskatchewan · 16 cities in sample
Hardness (city vs Saskatchewan avg)214 mg/L
pH (city vs Saskatchewan avg)7.7
Lead (city vs Saskatchewan avg)0.6 μg/L
Fluoride (city vs Saskatchewan avg)0.5 mg/L
Provincial average: hardness 189 mg/L · pH 7.4 · lead 0.5 μg/L · fluoride 0.6 mg/L
Full parameters
| Parameter | Reading | Health Canada guideline | Status |
|---|---|---|---|
| Hardness | 214 mg/L | No health limit (aesthetic) | Compliant |
| pH | 7.7 | 6.5–8.5 | Compliant |
| Lead | 0.6 μg/L | ≤ 5 μg/L | Compliant |
| Fluoride | 0.5 mg/L | ≤ 1.5 mg/L | Compliant |
| Chlorine (free) | 1.1 mg/L | ≤ 4 mg/L | Compliant |
| Turbidity | 1.5 NTU | ≤ 1 NTU (typical target) | Exceeds guideline |
Alberta water licences
WaterRegister.ca
On a private well or holding an Alberta water allocation licence? Water Register maps EPA licence records, transfer comparables, and watershed context across the province.
Explore WaterRegister.ca →Water softeners for hard water
Very hard water. Whole-house softeners are the high-ticket fit; salt and test kits support the install.
As an Amazon Associate, OpenStats earns from qualifying purchases.
· Compare options- Shop on Amazon.caWhole-house water softenerBest for hardness ≥ 180 mg/L
- Shop on Amazon.caSoftener saltOngoing supply (high repurchase)
- Shop on Amazon.caWater descalerScale reduction without salt
- Shop on Amazon.caWater hardness test stripsConfirm mg/L before sizing a unit
- Shop on Amazon.caTDS meterQuick dissolved-solids check
Source · ECCC / municipal open data (seed). Last updated 2026-09-01. Refreshed on the site's automated schedule.