By OpenStats · Built from official Canadian sources
Regional estimateWater quality grade
Fair
Graded against Health Canada drinking water guidelines
Brooks at 234 mg/L is hard enough to scale kettles, but most residents solve taste and lead at the tap first. Carbon filtration + test strips; whole-house softener only if repeat hardness readings justify it.
OpenStats pick for Brooks’s 234 mg/L hardness — drinking-water carbon first; pitchers do not soften
Higher-flow kitchen carbon for Brooks without dedicating a softener closet
Brooks at 234 mg/L — measure before jumping to a whole-house softener
Consider whole-house softening only if strips confirm 234 mg/L+ is wrecking appliances
As an Amazon Associate, OpenStats earns from qualifying purchases.
Municipal reports cover the plant. A Tap Score kit tests the water at a Brooks tap for a broader contaminant panel.
Lab kit partner link. We may earn a commission when tracking is active.
Under-sink and RO systems from Waterdrop Canada — a direct brand alternative to marketplace filters.
Waterdrop affiliate link. We may earn a commission.
Brooks's drinking water earns Grade C (Fair). Hardness is 234 mg/L (very hard), and pH is 8.2 against Health Canada's 6.5–8.5 guideline.
Lead at 0.2 μg/L is below the 5 μg/L maximum, and fluoride is 0.7 mg/L against a guideline of ≤ 1.5 mg/L.
How to use this page: read the headline metric and provincial comparison first, then supply and treatment notes, then the source footer for the underlying dataset.
Watershed to tap
How Brooks draws, treats, and distributes drinking water, from municipal and utility publications. Chemistry grades above come from separate parameter records; this section does not invent plant lab figures.
Surface water
Research confidence: high
Brooks / Newell Regional Water Treatment Plant
NRSC membrane filtration plant; chlorine then ammonia for chloramine residual. Raw water pumped about 7 km from Lake Newell pumphouse.
Newell Regional Services Corp. supplies Brooks and County of Newell hamlets plus transmission to Rosemary, Duchess, and Bassano.
Health parameters meet Health Canada limits; turbidity above the 1 NTU typical target and very hard water.
One or more parameters exceed a Health Canada drinking water guideline or turbidity target.
Figure 1 · Supply chain
From watershed to tap
Alberta · 51 cities in sample
Provincial average: hardness 178 mg/L · pH 7.5 · lead 0.3 μg/L · fluoride 0.6 mg/L
| Parameter | Reading | Health Canada guideline | Status |
|---|---|---|---|
| Hardness | 234 mg/L | No health limit (aesthetic) | Compliant |
| pH | 8.2 | 6.5–8.5 | Compliant |
| Lead | 0.2 μg/L | ≤ 5 μg/L | Compliant |
| Fluoride | 0.7 mg/L | ≤ 1.5 mg/L | Compliant |
| Chlorine (free) | 0.7 mg/L | ≤ 4 mg/L | Compliant |
| Turbidity | 3.5 NTU | ≤ 1 NTU (typical target) | Exceeds guideline |
On a private well or holding an Alberta water allocation licence? Water Register maps EPA licence records, transfer comparables, and watershed context across the province.
Explore WaterRegister.ca →OpenStats pick
Brooks at 234 mg/L is hard enough to scale kettles, but most residents solve taste and lead at the tap first. Carbon filtration + test strips; whole-house softener only if repeat hardness readings justify it.
As an Amazon Associate, OpenStats earns from qualifying purchases.
· Compare options
