Drinking Water Quality and Supply

Steinbach tap water: Grade B, hardness 171 mg/L

By OpenStats · Built from official Canadian sources

Regional estimate
B

Water quality grade

Good

Graded against Health Canada drinking water guidelines

Lead within guidelinepH in range
Hardness vs provincial average171 mg/L · prov. avg 163 mg/L
Lead vs provincial average0.3 μg/L · prov. avg 0.4 μg/L
Hardness
171 mg/L
Lead
0.3 μg/L
≤ 5 μg/L
pH
6.9
6.5–8.5 range
Hardness
171 mg/L
Hard
Lead
0.3 μg/L
Max: 5 μg/L
pH
6.9
6.5–8.5
Chlorine
0.8 mg/L
Max: 4 mg/L
Sponsored

OpenStats picks for Steinbach — moderate hardness

Steinbach at 171 mg/L is hard enough for kettle scale but often below whole-house softener urgency. Carbon filtration for taste plus hardness strips before you overspend.

As an Amazon Associate, OpenStats earns from qualifying purchases.

Partner

Lab water test for Steinbach taps

Municipal reports cover the plant. A Tap Score kit tests the water at a Steinbach tap for a broader contaminant panel.

Lab kit partner link. We may earn a commission when tracking is active.

Partner

Waterdrop filtration systems

Under-sink and RO systems from Waterdrop Canada — a direct brand alternative to marketplace filters.

Waterdrop affiliate link. We may earn a commission.

Compare filters · Water test kits · Hardness guide

Reading this page

Steinbach's drinking water earns Grade B (Good). Hardness is 171 mg/L (hard), and pH is 6.9 against Health Canada's 6.5–8.5 guideline.

Lead at 0.3 μg/L is below the 5 μg/L maximum, and fluoride is 0.6 mg/L against a guideline of ≤ 1.5 mg/L.

How to use this page: read the headline metric and provincial comparison first, then supply and treatment notes, then the source footer for the underlying dataset.

Watershed to tap

Supply and treatment

How Steinbach draws, treats, and distributes drinking water, from municipal and utility publications. Chemistry grades above come from separate parameter records; this section does not invent plant lab figures.

Source type

Groundwater

Research confidence: medium

Source waters

  • Local aquifers (Steinbach wells)

Treatment plants

  • Steinbach Water Treatment Plant (well supply)

    City groundwater wells with treatment/disinfection for the urban distribution system in southeastern Manitoba.

Distribution

City reservoirs and watermains; hardness typically elevated on prairie carbonate aquifers.

Cited sources

Supply notes summarize published utility materials. They are not a substitute for the issuing authority's current notices or for a licensed tap test.

Health parameters meet Health Canada limits; turbidity above the 1 NTU typical target.

Health parameters meet Health Canada limits; turbidity exceeds the typical 1 NTU aesthetic target.

Figure 1 · Supply chain

From watershed to tap

Compared to provincial average

Manitoba · 13 cities in sample

Hardness (city vs Manitoba avg)171 mg/L
pH (city vs Manitoba avg)6.9
Lead (city vs Manitoba avg)0.3 μg/L
Fluoride (city vs Manitoba avg)0.6 mg/L

Provincial average: hardness 163 mg/L · pH 7.5 · lead 0.4 μg/L · fluoride 0.6 mg/L

Full parameters

ParameterReadingHealth Canada guidelineStatus
Hardness171 mg/LNo health limit (aesthetic)Compliant
pH6.96.5–8.5Compliant
Lead0.3 μg/L≤ 5 μg/LCompliant
Fluoride0.6 mg/L≤ 1.5 mg/LCompliant
Chlorine (free)0.8 mg/L≤ 4 mg/LCompliant
Turbidity1.2 NTU≤ 1 NTU (typical target)Exceeds guideline
Alberta water licences

WaterRegister.ca

On a private well or holding an Alberta water allocation licence? Water Register maps EPA licence records, transfer comparables, and watershed context across the province.

Explore WaterRegister.ca →

OpenStats pick

OpenStats picks for Steinbach — moderate hardness

Steinbach at 171 mg/L is hard enough for kettle scale but often below whole-house softener urgency. Carbon filtration for taste plus hardness strips before you overspend.

As an Amazon Associate, OpenStats earns from qualifying purchases.

· Compare options

Source · ECCC / municipal open data (seed). Last updated 2026-09-01. Refreshed on the site's automated schedule.