OpenStats picks for Lethbridge — moderate hardness
Lethbridge at 151 mg/L is hard enough for kettle scale but often below whole-house softener urgency. Carbon filtration for taste plus hardness strips before you overspend.
By OpenStats · Built from official Canadian sources
Direct municipal dataWater quality grade
Good
Graded against Health Canada drinking water guidelines
Lethbridge at 151 mg/L is hard enough for kettle scale but often below whole-house softener urgency. Carbon filtration for taste plus hardness strips before you overspend.
OpenStats pick for Lethbridge at 151 mg/L — everyday chlorine taste
Skip the pitcher wait in Lethbridge
Confirm 151 mg/L before a softener
Recurring cartridge supply
As an Amazon Associate, OpenStats earns from qualifying purchases.
Municipal reports cover the plant. A Tap Score kit tests the water at a Lethbridge tap for a broader contaminant panel.
Lab kit partner link. We may earn a commission when tracking is active.
Under-sink and RO systems from Waterdrop Canada — a direct brand alternative to marketplace filters.
Waterdrop affiliate link. We may earn a commission.
Lethbridge water hardness is 151 mg/L, from the city's published water quality reporting.
How to use this page: read the headline metric and provincial comparison first, then supply and treatment notes, then the source footer for the underlying dataset.
Watershed to tap
How Lethbridge draws, treats, and distributes drinking water, from municipal and utility publications. Chemistry grades above come from separate parameter records; this section does not invent plant lab figures.
Surface water
Research confidence: high
Lethbridge Water Treatment Plant
East bank of the Oldman River south of Whoop-Up Drive; conventional surface-water treatment (coagulation, sedimentation, filtration, disinfection). City states it does not use groundwater wells for the municipal supply.
Plant produces tens of millions of litres per day on average for Lethbridge and regional customers; capacity upgrades are underway to raise maximum daily throughput for southern Alberta growth.
Health parameters meet Health Canada limits; turbidity above the 1 NTU typical target.
Health parameters meet Health Canada limits; turbidity exceeds the typical 1 NTU aesthetic target.
Figure 1 · Supply chain
From watershed to tap
Alberta · 51 cities in sample
Provincial average: hardness 178 mg/L · pH 7.5 · lead 0.3 μg/L · fluoride 0.6 mg/L
| Parameter | Reading | Health Canada guideline | Status |
|---|---|---|---|
| Hardness | 151 mg/L | No health limit (aesthetic) | Compliant |
| pH | 7.9 | 6.5–8.5 | Compliant |
| Lead | 0 μg/L | ≤ 5 μg/L | Compliant |
| Fluoride | 0.7 mg/L | ≤ 1.5 mg/L | Compliant |
| Chlorine (free) | 0.5 mg/L | ≤ 4 mg/L | Compliant |
| Turbidity | 1.7 NTU | ≤ 1 NTU (typical target) | Exceeds guideline |
On a private well or holding an Alberta water allocation licence? Water Register maps EPA licence records, transfer comparables, and watershed context across the province.
Explore WaterRegister.ca →OpenStats pick
Lethbridge at 151 mg/L is hard enough for kettle scale but often below whole-house softener urgency. Carbon filtration for taste plus hardness strips before you overspend.
As an Amazon Associate, OpenStats earns from qualifying purchases.
· Compare options