Drinking Water Quality and Supply

Cornwall tap water: Grade C, hardness 152 mg/L

By OpenStats · Built from official Canadian sources

Regional estimate
C

Water quality grade

Fair

Graded against Health Canada drinking water guidelines

Lead within guidelinepH in range
Hardness vs provincial average152 mg/L · prov. avg 198 mg/L
Lead vs provincial average0 μg/L · prov. avg 0.3 μg/L
Hardness
152 mg/L
Lead
0 μg/L
≤ 5 μg/L
pH
8
6.5–8.5 range
Hardness
152 mg/L
Hard
Lead
0 μg/L
Max: 5 μg/L
pH
8
6.5–8.5
Chlorine
0.5 mg/L
Max: 4 mg/L
Sponsored

OpenStats picks for Cornwall — moderate hardness

Cornwall at 152 mg/L is hard enough for kettle scale but often below whole-house softener urgency. Carbon filtration for taste plus hardness strips before you overspend.

As an Amazon Associate, OpenStats earns from qualifying purchases.

Partner

Lab water test for Cornwall taps

Municipal reports cover the plant. A Tap Score kit tests the water at a Cornwall tap for a broader contaminant panel.

Lab kit partner link. We may earn a commission when tracking is active.

Partner

Waterdrop filtration systems

Under-sink and RO systems from Waterdrop Canada — a direct brand alternative to marketplace filters.

Waterdrop affiliate link. We may earn a commission.

Compare filters · Water test kits · Hardness guide

Reading this page

Cornwall's drinking water earns Grade C (Fair). Hardness is 152 mg/L (hard), and pH is 8 against Health Canada's 6.5–8.5 guideline.

Lead at 0 μg/L is below the 5 μg/L maximum, and fluoride is 0.5 mg/L against a guideline of ≤ 1.5 mg/L.

How to use this page: read the headline metric and provincial comparison first, then supply and treatment notes, then the source footer for the underlying dataset.

Watershed to tap

Supply and treatment

How Cornwall draws, treats, and distributes drinking water, from municipal and utility publications. Chemistry grades above come from separate parameter records; this section does not invent plant lab figures.

Source type

Surface water

Research confidence: medium

Source waters

  • surface

Treatment plants

  • Cornwall Water Treatment Plant

    From municipal open data or regional estimate (verify locally).

Cited sources

Outbound municipal or utility citations pending. See methodology for how supply research is gathered.

Supply notes summarize published utility materials. They are not a substitute for the issuing authority's current notices or for a licensed tap test.

Health parameters meet Health Canada limits; turbidity above the 1 NTU typical target.

One or more parameters exceed a Health Canada drinking water guideline or turbidity target.

Figure 1 · Supply chain

From watershed to tap

Compared to provincial average

Prince Edward Island · 5 cities in sample

Hardness (city vs Prince Edward Island avg)152 mg/L
pH (city vs Prince Edward Island avg)8
Lead (city vs Prince Edward Island avg)0 μg/L
Fluoride (city vs Prince Edward Island avg)0.5 mg/L

Provincial average: hardness 198 mg/L · pH 7.6 · lead 0.3 μg/L · fluoride 0.5 mg/L

Full parameters

ParameterReadingHealth Canada guidelineStatus
Hardness152 mg/LNo health limit (aesthetic)Compliant
pH86.5–8.5Compliant
Lead0 μg/L≤ 5 μg/LCompliant
Fluoride0.5 mg/L≤ 1.5 mg/LCompliant
Chlorine (free)0.5 mg/L≤ 4 mg/LCompliant
Turbidity3.3 NTU≤ 1 NTU (typical target)Exceeds guideline
Alberta water licences

WaterRegister.ca

On a private well or holding an Alberta water allocation licence? Water Register maps EPA licence records, transfer comparables, and watershed context across the province.

Explore WaterRegister.ca →

OpenStats pick

OpenStats picks for Cornwall — moderate hardness

Cornwall at 152 mg/L is hard enough for kettle scale but often below whole-house softener urgency. Carbon filtration for taste plus hardness strips before you overspend.

As an Amazon Associate, OpenStats earns from qualifying purchases.

· Compare options

Source · ECCC / municipal open data (seed). Last updated 2026-09-01. Refreshed on the site's automated schedule.